If you have to paint metal parts for your model, I would suggest using 'white pigmented shellac' (not the water based type) as a primer. The trick is to first prepare the surface.
1- Lightly 'rough' up the surface(s) with a fine emery cloth.
2- Dip the parts in a cleaner (white vinegar is ok).
3- Rinse with cold water and let dry.
4- Apply a coat of shellac, let dry, then apply your paint.
Try not to touch the surfaces with your fingers after cleaning (use tweezers). I'll mount some of the parts on a wire or toothpick and stick the toothpick into a block of soft balsa wood. The shellac works on just about any metal, and sticks like glue to the surface. You can apply any type of paint on it, acrylic or oil. Clean up is easy, just use ammonia (and hold your nose!).
I use the Zinsser brand called "Bin":
http://www.zinsser.com/product_detail.asp?ProductID=10 
One quart of these will last for a very long time. Unless you decide to paint a room in your house too (LOL). I haven't tried the spray can yet, but that would probally be better for larger parts.
If the parts are copper or brass and you're looking to 'blacken' them to give the appearence of gun metal, then try using "Brass Black". We have a link for that here:
http://shipmodeling.net/forum/shop_...etal_parts.html (open in a blank window)

 

Custom Search

Searching for something? See Search Tips, Main Search Page, Amazon Quick Search Do a "Quickie" - Google that is!  Or would you rather - "Amazon"

Would you like me to add this as a Shop Note page?

 

Custom Search

Searching for something? See Search Tips, Main Search Page, Amazon Quick Search Do a "Quickie" - Google that is!  Or would you rather - "Amazon"

Sorry, I didn't see your reply till now. Yes, could you add it to the notes page? Thanks, sabah
Add on. I just saw my little shop tip in the Shop Notes pages. Thanks wirewolf1947.

 

Custom Search

Searching for something? See Search Tips, Main Search Page, Amazon Quick Search Do a "Quickie" - Google that is!  Or would you rather - "Amazon"